PU Glue for Silicate Fiber Board With Steel Aluminum Plate

PU Glue for Silicate Fiber Board With Steel Aluminum Plate


Glue for Aluminum Silicate Fiber Board

SPC-1001 PU glue can be used for bonding aluminum silicate fiber board with steel plate, aluminum plate, wood, plywood, MDF board, etc.


Glue aluminum to aluminum
Bond aluminum to aluminum 
Glue aluminum to calcium silicate board
Glue aluminum to wood
Glue aluminum to XPS extruded board
SPC-1001 Type Single-component Polyurethane Glue

SPC-1001 polyurethane glue is developed from imported raw materials, adopting the latest eco-friendly international formula and advanced technology. It is a single-component polyurethane adhesive that is superior in performance, convenient in use. This adhesive is tested to be eco-friendly, light smell, high viscosity, good cut and peel strength, heat
resistant, anti-aging, It can resist water, oil dirt, and cleaner's eroding after the adhesive film foamed and solidified.

Application scope:

With its satisfactory composite performance, the adhesive has been extensively applied to multiple boards of doors, light construction materials, refrigeration devices, environment protecting and purifying systems, metal board bonding metal board in vehicle and water craft making, metal board bonding paper covered plasterboard, rock wool, fiberglass wool, paper honeycomb, aluminum honeycomb, aluminum silicate fiber felt, polystyrene foam, plywood, glass fiber reinforced plastic (GFRP), extruded panel, mid density board, brick, melamine board and calcium silicate fire retardant board etc.

Application instruction:

Clean the target material surface;
Evenly spread the adhesive, about 150g/SQM;
Cover the material by raising pressure(about 0.5-1.0kg/cm2).
Release the pressure after adhesive solidified.
Note: Must press the target material within the adhesive active period, but not after the solidifying;
Press time: about 4 hours in summer, 6 hours in winter. 24 hours to reach the best intensity. To short the time, some water can be sprayed on the adhesive;
Wash the tools with acetic ether solvent.


Stored in warehouse or indoor, keep sealed. Shelf life is not less than 6 months.
The rest glue should be sealed with cover to avoid solidification.


Sealed package: 25kg/plastic barrel or 200kg/iron drum.



Copyright © 2014-2018 JIANGYIN SUNPING CHEMICAL CO., LTD. 
Address:Room 1101A, Huifeng Building, Jiangyin city, Jiangsu province, China