0086-510-81602872

Adhesive for fiber cement board

Adhesive for fiber cement board

Detail:

Adhesive for fiber cement board





         
 
 
Application:
  Adhesive for fiber cement board
  Adhesive for fiber cement board to XPS board
  Adhesive for fiber cement board to rock wool board
  Adhesive for fiber cement board to melamine board
  Adhesive for fiber cement board to phenolic insulation board 
  Adhesive for fiber cement board to phenolic foam board
  Adhesive for fiber cement board to Inorganic board
  Adhesive for fiber cement board to metal plate
  Adhesive for fiber cement board to steel plate
  Adhesive for fiber cement board to aluminum plate
  Adhesive for fiber cement board to EPS panel
  Adhesive for fiber cement board to wood 
  Adhesive for fiber cement board to plywood 
  Adhesive for fiber cement board to MDF board
  Adhesive for fiber cement sheet to fiber cement sheet
  Adhesive for fibrous cement sheet to fibrous cement sheet

 
SPC-1001 PU glue can be used for bonding fiber cement board with EPS, XPS, rock wool, melamine board, phenolic foam board, wood, plywood, etc. 
 

Description:

SPC-1001 polyurethane glue is developed from imported raw materials, adopting the latest eco-friendly international formula and advanced technology. It is a single-component polyurethane adhesive that is superior in performance, convenient in use. This adhesive is tested to be eco-friendly, light smell, high viscosity, good cut and peel strength, heat
resistant, anti-aging, It can resist water, oil dirt, and cleaner's eroding after the adhesive film foamed and solidified.



Application scope:

With its satisfactory composite performance, the adhesive has been extensively applied to multiple boards of doors, light construction materials, refrigeration devices, environment protecting and purifying systems, metal board bonding metal board in vehicle and water craft making, metal board bonding paper covered plasterboard, rock wool, fiberglass wool, paper honeycomb, aluminum honeycomb, aluminum silicate fiber felt, polystyrene foam, plywood, glass fiber reinforced plastic (GFRP), extruded panel, mid density board, brick, melamine board and calcium silicate fire retardant board etc.

 
Application instruction:

Clean the target material surface;
Evenly spread the adhesive, about 150g/SQM;
Cover the material by raising pressure(about 0.5-1.0kg/cm2).
Release the pressure after adhesive solidified.
Note: Must press the target material within the adhesive active period, but not after the solidifying;
Press time: about 4 hours in summer, 6 hours in winter. 24 hours to reach the best intensity. To short the time, some water can be sprayed on the adhesive;
Wash the tools with acetic ether solvent.


Storage:

Stored in warehouse or indoor, keep sealed. Shelf life is not less than 6 months.
The rest glue should be sealed with cover to avoid solidification.


Package:

Sealed package: 25kg/plastic barrel or 200kg/iron drum.

 
                                                       



Contact


Mr John
E-mail:info@puglue.com/ john@puglue.com
Whatsapp:0086 13616167336
Wechat:C13616167336

Copyright © 2014-2018 JIANGYIN SUNPING CHEMICAL CO., LTD. 
Address:Room 1101A, Huifeng Building, Jiangyin city, Jiangsu province, China

TEL:0086-510-81602872
 


wechat