Detail:
Adhesive for XPS board
Application:
Adhesive for XPS insulation board
Adhesive for XPS board to xps board
Adhesive for XPS board to calcium silicate board
Adhesive for XPS board to steel plate
Adhesive for XPS board to aluminum plate
Adhesive for XPS board to aluminum composite panel
Adhesive for XPS board to inorganic plate
Adhesive for XPS board to wall insulation board
Adhesive for XPS board to glass magnesium board
Adhesive for XPS board to ceramic tile
Adhesive for XPS board to stone
Adhesive for XPS board to stone wall insulation board
Adhesive for XPS board to marble
Adhesive for xps sandwich panel
Adhesive for xps board to fiber cement
adhesive for curtain wall
adhesive for facades
adhesive for exterior panel
adhesive for counter top
adhesive for curtain wall decorative panel
adhsive for decorative insulated panel
SPC-1001 type polyurethane glue, a single-component glue that developed by our corporation, is superior in performance and operation. By adopting solidifying way of micro moisture in air and cohered surface, the glue line is no-dissolving and no-melting. Therefore it has been extensively used in metal plates such as color steel plates, galvanized plates and aluminium plates as well as inorganic boards such as paper gypsum planks, calcium silicate boards, glass magnesium boards, medium density board and ternary plates. In addition, it can also applied to fireproof material （rockwool, glass fiber, perlite, aluminosilicate fiber felt）, heat insulating material （EPS FWB foams,XPS, rigid PU foams）, sound-proof material（paper honeycomb, aluminum honeycomb） and finishing material（melamine board）.
Technology Index:
Appearance： dark brown or brown sticky liquid
Working Time: 10 minutes (could be adjust according to customers requirement)
Curing Time：30 minutes（specific time should be provided as users require）
Shelf Time: 12 months
Density： 1.15±
Viscosity： 8~20 pa.s（
Solubility： soluble to acetone and ethyl acetic acid
Dose： 120~
Non-volatile ratio： ≥94%
TFT： ≤2h
Cohesive Intensity：
（1） Metal plate to metal plate ≥15MPa（GB6329）
（2） Metal plate to heat insulating material
Non-metal destruction during delamination operation （GB6329）
Usage Methods:
（1） Remove oil, dust on the surfaces of being cohered materials. It is not recommended to apply the glue on particularly smooth surfaces or special rough surfaces, which have negative impact on cohesive intensity.
（2） Homogeneously spread the glue on cohered surface with sawtooth scrapers. Dose of the applied glue is about
（4） After spreading glue, cover adhering material by raising pressure for solidification. Make sure that materials should be laminated before touch dry. Otherwise, its cohesive strength will be decreased.
（5） By using pressing machine or heavy object, the pressure put on adhering materials should be between 0.5kg~1kg/cm2.Only when Solidification process is completed should machine or object be moved.
（6）Pressure time varies with temperature and humidity of the day, which is from 5 to 12 hours （24 hours for the highest cohesive strength）.
（7）Wash tool with ethyl acetate solvent.
Caution:
Please seal barrel of remaining glue to prevent moisture. For long-term storage, fill nitrogen gas. When users apply the glue to other new materials, be sure to do test at first. Above technical tips are only for suggestions. Users should work out their techniques according to tests. Our corporation will not undertake the due obligations for any possible quality accidents occurred during the operation process formulated by users.
Storage and Package:
（1）Storage： One year when stored in normal warehouse
（2）Package：
Contact:
Lucy
E-mail: sales@puglue.com
2900326926@qq.com
info@puglue.com
Tel: 13616167336
